Sustain logo

dc-ac stand alone sinewave inverters

Flange mount system diagram
Example 3kVA configuration


R Series Technical Data
MODEL R1500-48
R1500-48S
R1200-24
R1200-24S
PRODUCT STATUS Available December 2000
OUTPUT
Voltage 230VAC ± 5%
Load regulation ± 5% 0-130% load
Frequency 50Hz/60Hz ± 0.02%
Distortion <3% THD for linear load
Load power factor 0.6 lagging to 0.8 leading
Nominal output power at 50°C 1500VA 1200VA
Efficiency 90% (>75%@100VA) 88% (>75%@100VA)
Surge capability (programmable to suit input protection) 240% for 1sec, 200% for 5sec, 130% for 1 minute (typical at 30°C, thermally limited)
INPUT
Voltage range 40-58V 20-29V
Low voltage shutdown 43.5V (adjustable) 21.7V (adjustable)
Nominal full load input current 31A at 48V 50A at 24V
Maximum continuous input current (programmable to suit circuit protection) 40A 55A
Inrush current < 30A
No load power draw < 14W
Sleep mode (output disabled) < 1W
Reverse voltage protection Automatic, indefinite
ISOLATION
Input to output 3kV RMS
Input to case 500V DC
ALARMS CONTROL AND COMMUNICATION
Alarm output Volt free changeover contacts
Low battery output Open collector 60V 20mA max
Remote control input Remote On/Shutdown control
External sync input 45Hz to 65Hz
Remote metering / data logging 365 days via FPD Power Management Unit or RS232 serial adaptor SA100
System configuration settings DIP switch or via FPD Power Management Unit PMU100 (two level secure access)
Remote control and diagnostics Via FPD Power Management Unit PMU100 using RS232 or open collector parallel outputs
ENVIRONMENTAL
Operating temperature range -15°C To +50°C
Cooling Temperature controlled fan
Ingress protection IP20
COMPLIANCE AND APPROVALS
Safety BS EN 60950
Emissions BS EN 50081-1
Noise immunity BS EN 50082-2
PHYSICAL
Dimensions including mounting flanges 250 X 342 X 95 (H x W x D)
Weight 5kg
DC input connections - standard 55A Anderson (standard cable size 10mm² or 16mm²)
DC input connections - stud option (S suffix) 8mm studs for cable size up to 95mm²
AC output connections Shrouded Wieland type ST18 16A
Monitoring/control connections RJ45
Please note all specifications are subject to change without notice

if you would like to place an order or talk to us about your inverter needs email us at sales@futronics.co.uk or phone +44 1279 843128